#2&Btr Green Douglas Fir 2" x 4" x 8' S4S

Actual: 1-1/2" x 3-1/2" x 8'

This is #2 and Better Douglas Fir, supplied in a green (fresh-cut, not kiln dried) condition and surfaced on four sides (S4S) for smooth, square edges. It’s a strong, reliable, and versatile choice for a wide range of construction needs, including residential framing, beams, and general structural applications.

Because the lumber is green, it contains a higher moisture content, so shrinkage and movement should be considered as it dries. This makes it best suited for projects where the wood will be nailed or fastened in place shortly after purchase.

Lumber Grades and Definitions

A reference guide to the common grades and surfacing designations for this type of lumber.

• #2&Btr: “#2 and Better” is a structural lumber grade. Each piece is at least grade #2 quality and may include higher grades. This grade ensures sufficient strength and reliability for framing and general construction.
• Green: Describes the moisture content of the lumber. “Green” means freshly cut and not kiln-dried, so it contains higher moisture. Green lumber nails easily without splitting but should be used or allowed to dry promptly to avoid shrinkage or warping.
• Douglas Fir: The species of wood. Douglas Fir is widely used for structural applications because of its high strength-to-weight ratio, dimensional stability, and workability. It is a dependable softwood for framing, beams, and heavy construction.
• S4S: Abbreviation for “Surfaced Four Sides.” Indicates the lumber has been planed smooth on all four sides for uniform dimensions and square edges. S4S lumber is easy to handle and ready for use in both construction and finish applications.

⚠️ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.